An exceptional
finishing touch.
Finishing is where a printed sheet becomes a premium object. Explore the techniques that bring your packaging to life.
Foil
Metallic and pigmented foils applied by heated die, registered to the print.
Hot Foil Stamping
Metallic foil applied by heated die, registered to the print.
Gold, silver, copper and coloured foils. Applied flat before any wrapping or forming, so registration is controlled on a sheet rather than on a curve.
Cold Foil
Foil applied in-line during printing rather than by heated die.
Faster and cheaper over large areas, and it can be overprinted to create metallic colours. Less crisp on fine detail than hot foil.
Holographic Foil
Diffractive foil stamped to a fixed position in the artwork.
Positioned rather than random, which is what separates a security feature from decoration.
Pigment & Matt Foil
Solid non-metallic foils in flat colours.
White, black and brand colours in foil. The way to get a dense, perfectly even solid on a textured stock that ink would sink into.
Foil Over Emboss
Foil stamped and then embossed in register.
A sculpted metallic mark. The two passes have to be in that order — embossing first crushes the surface the foil needs.
Relief & impression
Effects you feel before you see — pressed into the sheet rather than laid on top of it.
Embossing
Raised relief pressed into the surface from behind.
Can be registered over foil for a sculpted metallic mark. Sequence matters: emboss after foil is standard, and reversing it damages the foil surface.
Debossing
Recessed relief pressed into the surface.
Often stronger than embossing on textured or uncoated stock, where the recess catches a shadow instead of relying on a highlight.
Letterpress
Inked type pressed hard into a soft, thick stock.
Needs cotton or another soft sheet to bite into. On coated board there is nothing to compress and the effect disappears.
Blind Emboss
Relief with no ink or foil at all.
The most restrained mark available, and the cheapest of the relief effects because there is no second material.
Multi-Level Emboss
Sculpted relief at more than one depth.
For crests, monograms and vintage marks where a single flat level would read as a stamp rather than a sculpture.
Coatings & lamination
The surface everything else contrasts against. Decide this before the effects.
Spot UV
Gloss varnish applied to selected artwork elements.
Highest contrast over a matte or soft-touch base. On a gloss laminate it barely reads — the base finish decides whether spot UV is worth paying for.
Soft-Touch Lamination
A velvet matte film laminated to the printed surface.
Changes how the pack feels more than how it looks, and hides fingerprints on dark artwork. The most requested finish on premium spirits and skincare.
Matte Lamination
A non-reflective film that protects and softens the surface.
Reduces surface glare and protects printed colour. Compatibility with any additional print effect depends on the selected film and ink system.
Gloss Lamination
A high-shine film that lifts colour saturation.
Makes colour photography and bright brand colours read stronger on shelf, and resists moisture better than an uncoated surface.
Pearlescent Coating
A shimmering coating that shifts with the light.
A subtler alternative to metallic board or foil when you want light response across a whole panel rather than on one mark.
Raised / Textured Varnish
A varnish laid thickly enough to feel.
Gives a tactile edge to type or a pattern without a die. The usual substitute where emboss tooling is not justified by the run.
Glitter Varnish
A varnish carrying suspended glitter particles.
Used in festival and confectionery work. Specify the particle size — coarse reads as celebratory, fine reads as expensive.
Anti-Scuff Lamination
A matte film formulated to resist marking.
Ordinary matte film scuffs on dark artwork in transit. This is what you specify when the pack is dark and ships a long way.
Full-Surface UV
Gloss UV across the whole sheet.
Cheaper than lamination and more scuff-resistant than aqueous. Does not fold as reliably, so it suits flat components more than cartons.
Aqueous Coating
A water-based protective coat applied in-line.
The low-cost seal on cartons and shippers. Water-based, so a paper pack keeps its single-material specification for paper recycling.
Cutting & shaping
Windows, shaped outlines, perforations and the openings a structure needs.
Die Cutting
Custom shapes, windows and cut-outs.
Windows, shaped lids, handle apertures and label outlines. A window can be left open or patched with clear film depending on whether the product needs protecting.
Laser Cutting
Cutting by beam rather than by steel rule.
Reaches detail a die cannot — lace edges, fine filigree, very small internal shapes. Slower per sheet, so it suits short runs.
Window Patching
A clear film patched behind a die-cut aperture.
Lets the product sell itself while staying protected. Adds a film to the pack, which matters if the pack has to go into paper recycling as a single material.
Perforation & Tear Strips
A cut line that opens cleanly by hand.
Tear strips, shelf-ready fronts and easy-open cartons. Perf strength is set on the sample, not on the drawing.
Kiss Cutting
Cutting the face stock but not the liner beneath.
How sheets of labels and sticker sets are made. Depth has to be exact — too deep cuts the liner, too shallow will not peel.
Rounded Corners
Corners cut to a radius instead of a point.
On labels it stops edges lifting; on cards it stops corners dog-earing in a pocket. A small change with a measurable effect.
Edges & special effects
The details noticed at arm's length — edges, seals and dimensional effects.
Edge Painting
Colour applied to the cut edge of a thick card.
Only works on stock thick enough to show an edge — usually duplexed. Visible from every angle the piece is held at.
Edge Foiling
Foil applied to the cut edge rather than the face.
A metallic line around the perimeter of a card. Reads as expensive precisely because it is only visible when handled.
Duplex & Triplex
Two or three sheets bonded into one thicker card.
Gives a different colour or texture on each face, and the thickness that edge painting needs to show.
Wax Seal
A stamped wax seal, real or moulded.
Slow to apply by hand, which is the point on a limited edition. Moulded adhesive versions survive transit better than poured wax.
Dome (3D Resin)
A clear resin dome poured over a printed label.
Magnifies whatever is under it and shrugs off abrasion. Used on warranty badges and equipment labels rather than on shelf packaging.
Flocking
Fine fibres bonded electrostatically to the surface.
A velvet surface, usually inside a rigid box or on a lid panel. The most tactile finish available, and the hardest to keep clean.